1 Series E81 130i (N52K) 3-door
61 71 015
Removing and installing/replacing a spray
nozzle in windscreen washer system
Note:
The jet nozzles of the windscreen washer system are preset at the
factory and cannot be readjusted.
Disconnect plug connection (1).
Detach hose (2) from spray nozzle (4).
Press in retaining lug (3) in direction of arrow and feed out spray
nozzle (4) through opening.
Installation:
•
Make sure spray nozzle (4) is correctly seated
•
Ensure hose is laid without kinks.
Installation:
Following parts of spray nozzle (4) must not be damaged or
missing:
1
Plug connection
2
Hose connection
3
Detent lug, bottom
5
Detent lug, top
RA Removing and installing/replacing a spray nozzle in windscreen washer system
BMW AG - TIS
22.01.2013 09:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -