1 Series E81 130i (N52K) 3-door
Installation:
Make sure lug (2) of water reservoir for windscreen washer unit (1)
fits correctly in retaining fixture (3).
Unclip auxiliary direction indicator wiring harness (1) in direction of
arrow out of fluid reservoir for windscreen washer unit (2).
Installation:
Make sure auxiliary direction indicator wiring harness (1) is laid
correctly.
Remove fluid reservoir for windscreen washer system (2) in
direction of arrow.
Installation:
•
Replace strainers on washer pumps
•
Coat sealing rings of washer pumps with antiseize agent
•
Lay hoses of washer pumps without kinks and clip into
holders on fluid reservoir
•
Fill fluid reservoir
RA Replacing fluid reservoir for windscreen washer system
BMW AG - TIS
22.01.2013 09:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
