bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Replacing Drive Unit For Left Adaptive Headlight (after 03_2007)|Page 2256 > < 10 RA Replacing Ignition Unit For Right Xenon Headlight (with Xenon Bulb) (from 03_200|Page 2254
Page 1
background image

63 12 895

Replacing drive unit for left adaptive
headlight (after 03/2007)

Warning!

Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).

Work on the entire xenon lighting system (ignition unit, control
unit and lamp) may only be carried out by specialist
personnel.

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

Remove wheel arch cover front section

Undo screws (1) of control unit adapter (2). Tightening torque 
63 12 6AZ

.

Pull control unit adapter (2) downward from headlight (3) to
remove.

 

Installation:

Make sure control unit adapter (2) is correctly seated on
headlight (3).

RA  Replacing drive unit for left adaptive headlight (after 03/2007)

BMW AG - TIS

22.01.2013  09:23

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Replacing Drive Unit For Left Adaptive Headlight (after 03_2007)|Page 2256 > < 10 RA Replacing Ignition Unit For Right Xenon Headlight (with Xenon Bulb) (from 03_200|Page 2254