1 Series E81 130i (N52K) 3-door
Version with reading lights:
Note:
Operation is shown by way of example on the roof switch centre.
Important!
Reflector (2) and roofliner (3) must not be damaged.
Retaining clips (1) are located on centreline of both reading
lights.
Carefully unlock retaining clips (1) with special tool 00 9 341 .
Version without reading lights:
Important!
Reflector (2) and roofliner (3) must not be damaged.
Retaining clips (1) are located at distance (A) from outer edges
of ceiling light.
(A) = 35 mm
Carefully unlock retaining clips (1) with special tool 00 9 341 .
Lever ceiling light (1) with special tool 00 9 341 in direction of
arrow out of roofliner (2).
Disconnect plug connection underneath and remove ceiling
light (1).
Installation:
Assemble ceiling light prior to installation:
•
Feed in ceiling light trim (1) at line (2)
•
Press ceiling light trim (1) in direction of arrow onto ceiling
light (3)
Make sure ceiling light trim (1) is correctly engaged on ceiling
light (3).
RA Removing and installing or replacing complete ceiling light (rear, with module f
BMW AG - TIS
22.01.2013 09:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
