1 Series E81 130i (N52K) 3-door
64 11 855
Removing and installing / replacing
servodrive for central kinematics (heater - A /
C control)
Important!
Servomotors must be re-addressed in the event of
replacement!
Addressing can only be carried out with the BMW diagnosis
system.
Service functions:
-
Body
-
Heating and A/C function
-
Flap motors
-
Re-address flap motors
Necessary preliminary tasks:
•
Remove right glovebox with housing
•
Remove storage compartment
Detach right footwell heating duct (1) in area (2) in direction of
arrow.
Detach right footwell heating duct (1) with adapter (3) from
heater/air conditioner and remove in direction of arrow from right
rear compartment heating duct (4).
RA Removing and installing / replacing servodrive for central kinematics (heater -
BMW AG - TIS
22.01.2013 09:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
