1 Series E81 130i (N52K) 3-door
64 11 909
Removing and installing/replacing footwell
temperature sensor
Necessary preliminary tasks:
•
Remove lower left trim from instrument panel
Disconnect plug connection (1).
Turn footwell temperature sensor (2) in direction of arrow and pull
out of heater/air conditioner.
Installation:
Make sure footwell temperature sensor (2) is correctly seated in
heater/air conditioner (3).
RA Removing and installing/replacing footwell temperature sensor
BMW AG - TIS
22.01.2013 09:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
