1 Series E81 130i (N52K) 3-door
Release screws (1) and slide screw clamps (2) forwards slightly.
Remove pipes (3) from heater core (4).
Installation:
Replace sealing rings.
Coat sealing rings with antiseize agent.
Make sure sealing rings are correctly seated.
Important!
Inflow connection (3) may only be positioned at the bottom.
When installing, make sure that the return-flow
connection (2) (larger opening) marked with a black
dot (1) is positioned at the top.
Inflow connection (3) accordingly may only be positioned at
the bottom.
RA Replacing heater core
BMW AG - TIS
22.01.2013 09:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
