1 Series E81 130i (N52K) 3-door
64 11 213
Removing and installing/replacing heater/air
conditioner fan
Necessary preliminary tasks:
•
Remove trim for instrument panel at bottom right
Detach right footwell heating duct (1) in direction of arrow from
retaining lug (3) and lay to one side slightly.
Installation:
Make sure clip (2) is correctly seated.
Unfasten plug connection (1) and disconnect.
Raise plastic lug (2) slightly and turn fan (4) in direction of arrow.
Remove fan (4) from fan shell (5).
Installation:
If necessary, raise lug (3) slightly and screw in fan (4)
counterclockwise.
Make sure fan (4) is correctly seated in fan shell (5).
Check exact position of lug (2).
RA Removing and installing/replacing heater/air conditioner fan
BMW AG - TIS
22.01.2013 09:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
