bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Replacing Line From Evaporator To Condenser (N52K)|Page 2421 > < 10 RA Replacing Line From Evaporator To Compressor (N52K)|Page 2419
Page 1
background image

64 53 701

Replacing line from evaporator to condenser
(N52K)

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Avoid contact with refrigerant and refrigerant oil.

Follow safety instructions for handling refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Follow instructions for opening and replacing parts in
refrigerant circuit.

If A/C system is opened for more than 24 hours:

Replace desiccant insert for A/C system 

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Partially detach expansion tank and place to one side

Remove microfilter housing

Remove both tension struts from spring strut dome

Release screws (1) and remove refrigerant line.

Installation:

Replace sealing rings and moisten with refrigerant oil.

Tightening torque 64 53 2AZ

.

RA  Replacing line from evaporator to condenser (N52K)

BMW AG - TIS

22.01.2013  09:55

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Replacing Line From Evaporator To Condenser (N52K)|Page 2421 > < 10 RA Replacing Line From Evaporator To Compressor (N52K)|Page 2419