1 Series E81 130i (N52K) 3-door
64 53 515
Replacing desiccant insert for A/C system
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:
Replacing drier insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove condenser
If necessary, pierce sticker over screw plug (1).
Open screw plug (1) and remove drier insert from A/C system
condenser (3).
Installation:
Tightening torque 64 53 12AZ
.
Replace sealing ring and moisten with refrigerant oil.
RA Replacing desiccant insert for A/C system
BMW AG - TIS
22.01.2013 09:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
