1 Series E81 130i (N52K) 3-door
65 11 080
Removing and installing/replacing radio
receiver
Necessary preliminary tasks:
•
Remove operator unit for heater/air conditioner
Release screws (1).
Pull back radio receiver (2) slightly.
Disconnect associated plug connections and remove radio
receiver (2).
Installation:
Make sure the rear guide pin of the radio receiver (2) is correctly
seated in the associated mounting.
Replacement:
Carry out programming/coding.
RA Removing and installing/replacing radio receiver
BMW AG - TIS
22.01.2013 09:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -