1 Series E81 130i (N52K) 3-door
72 12 ...
Procedure after airbag triggering as result of an accident
Check and/or replace following components after airbag triggering:
Satellites (control unit + sensor)
-
Components
•
Satellite, A-/B-pillar, left/right
•
Satellite, front door
•
Satellite, rear seat
•
Satellite, driver's/front passenger seat
•
Satellite, vehicle center
-
Procedure
•
Read out fault memory
•
Disconnect battery and observe waiting period
•
Rectify faults
•
Reconnect battery and observe waiting period
•
Clear fault memory
•
Turn off ignition and wait at least 2 minutes (no consumers may be switched on during this period such as
e.g. inside lights, radio, etc.)
•
Switch ignition on.
•
Clear fault memory and if necessary rectify faults
Cables and plugs
-
Components and procedure
•
Check cables and plugs for damage, replace if necessary.
Belt system
-
Components
•
Automatic safety belt tensioner
•
Belt buckle tensioner
•
Seatbelt height adjustment
-
Procedure
•
Check components, replace if necessary
Seats
-
Components
•
Seat
•
Airbag module
•
Active head restraint
-
Procedure
RA Procedure after airbag triggering as result of an accident
BMW AG - TIS
22.01.2013 10:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
