1 Series E81 130i (N52K) 3-door
72 12 ...
Unlocking/locking airbag plug connections
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Important!
An airbag plug connection must be replaced if it is damaged.
Sourcing reference for airbag repair instructions (with plug
connection), refer to BMW Parts Service.
Following versions of plug connections on airbag module/gas
generator are possible:
-
Airbag plug connection on gas generator/airbag module is
offset by 90
°
-
Airbag plug connection on gas generator/airbag module is
straight (3 versions)
Airbag plug connection on gas generator/airbag module offset
by 90
°°°°
:
There are two ways of unlocking this airbag plug connection on
the gas generator/airbag module:
Method 1:
Simultaneously pull cover (1) upwards at lugs on left and
right (2).
RA Unlocking/locking airbag plug connections
BMW AG - TIS
22.01.2013 10:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -