1 Series E81 130i (N52K) 3-door
The airbag plug connection is unlocked and can now be detached
from the gas generator/airbag module.
Installation:
After attaching airbag plug connection to gas generator/airbag
module, check whether detent lug (2) is visible in opening of
locking/unlocking plate (1).
Only if the detent lug (2) is visible will the airbag plug connection
gas generator/airbag module be correctly engaged.
Version 2:
Press locking/unlocking plate (1) on edge (3) and pull plug (2)
out of plug housing (4).
Installation:
Only if the detent lug is visible in opening (5) will the gas
generator/airbag module plug connection be correctly engaged.
Version 3:
Press lock button (1) and pull out plug (2) up to initial
engagement position.
Detach plug (2) from firing pellet.
Installation:
Insert plug connection in initial engagement position in gas
generator/airbag module and engage in final engagement
position.
RA Unlocking/locking airbag plug connections
BMW AG - TIS
22.01.2013 10:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -