1 Series E81 130i (N52K) 3-door
72 12 000
Removing and installing or replacing airbag
module on passenger side
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove glove compartment
Unlock plug connections (1) and disconnect.
Note:
Secure airbag module against falling out.
Unscrew nuts (2).
Tightening torque 72 12 01AZ
.
Remove airbag module in downwards direction.
RA Removing and installing or replacing airbag module on passenger side
BMW AG - TIS
22.01.2013 10:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
