1 Series E81 130i (N52K) 3-door
86 10 ...
Disassembly of loading ramp
frame/disassembly of rail, left/right
Note:
Two persons are required to disassemble the loading ramp
frame.
Disassembly of license plate mounting plate
refer to 86 10 ... Disassembly of license plate
mounting plate.
Disassembly of pull rod
refer to 86 10 ... Disassembly of overrunning equipment.
Release screws (1) of loading ramp frame (2) on cross-strut (3).
Installation:
Tightening Torque,
refer to Technical Data 86 10 7AZ.
Release screws (1, 2) on left and right sides of loading ramp
frame (3).
Installation:
Use new self-locking nuts.
Tightening Torque,
refer to Technical Data 86 10 8AZ.
Release screws (1, 2, 3).
Installation:
Use new self-locking nuts.
Tightening Torque,
refer to Technical Data 86 10 9AZ.
RA Disassembly of loading ramp frame/disassembly of rail, left/right
BMW AG - TIS
22.01.2013 10:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
