bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

27 RA Removing Loading Ramp Lock > < 25 RA Removing Entry Profile Section On Loading Ramp, Left, Right And Center
Page 1
background image

86 10 ...

Removing left or right shock absorber

Inspect the shock absorber while installed to ascertain
whether it needs to be replaced. 

Replace shock absorber if it is leaking. Replace shock
absorber if it can be easily pushed in or pulled out when
removed.

Release screw (1) and remove. Tilt shock absorber in direction of
arrow. Release screw (2) and remove shock absorber.

Installation:

Hold shock absorber vertically: protective cap points upwards.
Completely press in shock absorber once and pull out up to
required installation length. Do not tilt shock absorber further
than is needed for installation.

Tightening Torque,

refer to Technical Data 86 10 21AZ.

RA  Removing left or right shock absorber

BMW AG - TIS

22.01.2013  10:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

27 RA Removing Loading Ramp Lock > < 25 RA Removing Entry Profile Section On Loading Ramp, Left, Right And Center