1 Series E81 130i (N52K) 3-door
86 10 ...
Removing wheel bearing
The angular-contact ball bearings do not require maintenance and
have lifetime lubrication. The bearings cannot be readjusted.
Remove brake drum,
refer to 86 10 ... Removing brake shoes.
Lever out both snap rings (1).
Installation:
Replace expanded or damaged snap rings (1). Ensure correct
seating.
Press out wheel bearing with special tool 24 1 010.
Caution!
Do not reuse old wheel bearing.
Place new wheel bearing (1) with lathe-turned end (2) in center of
bore in brake drum (3).
Installation:
Before pressing in new wheel bearing, check bearing seat for
possible damage.
Make sure wheel bearing is not tilted when pressed in.
RA Removing wheel bearing
BMW AG - TIS
22.01.2013 10:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
