1 Series E81 130i (N52K) 3-door
Insert pull rod (1) in brake compensator (2) and screw nut (3) onto
pull rod (2).
Tighten nut (3) until pull rod (1) is free of play.
Check pull rod (1) already fitted for zero play.
Hook tension spring (1) to tension spring mount (2).
Installation:
The brake shoes are adjusted in two work steps. In the first
step, the distance between the lower half of the brake shoes
and the brake drum is adjusted. In the second step, the
distance between the upper half of the brake shoes and the
brake drum is adjusted.
Rotate road wheel (1) in direction of travel and simultaneously turn
adjusting screw (2) in direction of arrow.
Tighten adjusting screw (2) until road wheel (1) can no longer be
turned.
Turn adjusting screw (1) in direction of arrow and release slowly
until road wheel (2) can rotate.
Finish adjustment procedure when slight grinding noises can be
heard in lower brake shoe halves.
RA Adjusting brake system
BMW AG - TIS
22.01.2013 10:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
