1 Series E81 130i (N52K) 3-door
86 10 ...
Replacing drawbar members, left and right
Note:
Disassembly of overrunning equipment,
refer to 86 10 ... Disassembly of overrunning equipment.
Remove complete brake pull rod.
Removal of position light cable,
refer to 86 10 ... Replacing license plate light.
Release screws (1) on cross-member (2). Pull out cross-member
(2) towards rear.
Installation:
Tightening Torque,
refer to Technical Data 86 10 16AZ.
Release countersunk head screws (1) and remove.
Installation:
Tightening Torque,
refer to Technical Data 86 10 3AZ.
Remove cable holder (1) and remove wiring harness (2) from
drawbar member (3).
RA Replacing drawbar members, left and right
BMW AG - TIS
22.01.2013 10:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
