1 Series E81 130i (N52K) 3-door
11 41 Oil Pump with Strainer and Drive
Type
Thread
Tightening specification
Measure
Optional extra designation:
SA203 = All-wheel drive
1AZ ASA screws
(2 x with optional extra SA203)
(3 x without optional extra SA203)
Suction pipe to bedplate.
The end faces of the aluminium
screw heads are painted blue.
N52K
M6 x 30
Replace screws.
Thread repairs exclusively
with aluminium Helicoil
threaded insert.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
4 Nm
Torque angle
100
°
2AZ ASA screw
(1 x)
Oil pump to bedplate.
The end faces of the aluminium
screw heads are painted blue.
N52K
M8 x 123
Replace screw.
Thread repairs exclusively
with aluminium Helicoil
threaded insert.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
10 Nm
Torque angle
180
°
3AZ ASA screws
(2 x)
Oil pump to bedplate.
The end faces of the aluminium
screw heads are painted blue.
N52K
M8 x 31
Replace screws.
Thread repairs exclusively
with aluminium Helicoil
threaded insert.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
10 Nm
Torque angle
90
°
4AZ ASA screw
(1 x)
Chain module to crankcase.
AZD Oil Pump with Strainer and Drive
BMW AG - TIS
22.01.2013 11:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
