1 Series 120d (N47) Coupe
Press fasteners (1) apart.
Slide oxygen sensor plug (2) down in direction of arrow.
Release screw (1) of clamp between diesel particulate filter (2)
and turbocharger (3).
Installation:
Tightening torque 18 31 1AZ
.
Release screw (1).
Installation:
Tightening torque 18 20 2AZ
.
Release nut on transmission exhaust system bracket.
Installation:
Tightening torque 18 20 5AZ
.
RA Removing and installing/replacing diesel particulate filter (N47)
BMW AG - TIS
15.01.2013 13:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -