1 Series 123d (N47S) Coupe
Open coolant drain plug on engine block.
Tightening torque: 11 11 2AZ
.
Installation:
Replace seal.
Crank engine with special tool 11 6 480 until piston of cylinder
No. 1 is in TDC position.
Use special tool 11 5 320 to secure flywheel in TDC position of
cylinder No. 1.
Release camshaft bolts (1).
Tightening torque: 11 31 1AZ
.
Remove chain wheel.
Important!
Protect timing chain to prevent it from falling.
Risk of damage to oil spray nozzle.
Release bolts (1) from outside to inside.
Remove camshaft carrier.
RA Removing and cylinder head (N47, N47S)
BMW AG - TIS
16.01.2013 01:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -