1 Series 123d (N47S) Coupe
13 71 140
Replacing intake manifold (between air-mass
flow sensor and exhaust turbocharger)
(N47S)
Necessary preliminary tasks:
•
Remove acoustic cover at front
•
Remove underbody protection
Unfasten clip.
Unclip lines from intake manifold.
Detach intake manifold from air-mass flow sensor.
Installation:
Make sure intake manifold (2) is correctly seated on air-mass
flow sensor.
Release screw.
RA Replacing intake manifold (between air-mass flow sensor and exhaust turbocharger
BMW AG - TIS
16.01.2013 03:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
