1 Series 123d (N47S) Coupe
Disconnect plug connection (1).
If necessary, release wiring harness fasteners from power
distributor.
Open covers (2) and release nuts underneath.
Tightening torque
•
61 21 2AZ
•
61 21 4AZ
Press locking brackets (2) downwards and unclip.
Remove power distributor (3) towards top.
If necessary, using a screwdriver (1), expand locking bracket (2)
at lower end and clip out.
RA Removing and installing/replacing power distributor (on battery) (from 03/2007)
BMW AG - TIS
17.01.2013 02:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -