1 Series 135is (N54) Coupe
Check position of intake camshaft (1) at 6th cylinder.
Roller cam follower (2) is not actuated.
Tighten lower and upper bearing banks with special tool
00 9 120 .
Tightening torque: 11 31 1AZ
.
Important!
Remove special tool 11 8 553 only when camshaft screw
connection is completed.
Adjust valve timing.
Assemble engine.
RA Removing and installing or replacing intake camshaft (N54)
BMW AG - TIS
18.01.2013 06:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -