1 Series 135is (N54) Coupe
34 11 000
Removing and installing/replacing brake pads
on both front disc brakes
Special tools required:
•
34 1 050
•
34 1 280
Important!
The brake pad wear sensor must be replaced once it has
been removed (brake pad wear sensor loses its retention
capability in the brake pad).
Necessary preliminary tasks:
•
Remove wheels
•
Remove brake pad wear sensor
Release bolts (1) and pull off brake caliper with brake anchor
plate towards rear.
Important!
Tie brake caliper back and do not allow to hang from brake
hose.
Installation:
Tightening torque 34 11 2AZ
.
RA Removing and installing/replacing brake pads on both front disc brakes
BMW AG - TIS
18.01.2013 08:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
