1 Series 135is (N54) Coupe
Tightening torque 34 32 3AZ
.
Important!
Never twist brake hose when installing it and avoid all contact
with parts attached rigidly to the body.
Note:
First tighten brake hose on brake caliper.
Insert brake hose in bracket and screw onto brake pipe.
Release screws (1).
Remove brake caliper (2) by pulling forward.
Installation:
Tightening torque 34 21 2AZ
.
Replacement:
Remove brake pads
RA Removing and installing/replacing left or right rear brake caliper
BMW AG - TIS
18.01.2013 09:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -