1 Series 135is (N54) Coupe
51 11 050
Removing and installing/replacing carrier for
front bumper trim
Necessary preliminary tasks:
•
Remove front bumper trim
Note:
Description is shown on the E82 by way of example. There may
be differences in detail in the case of other models.
Important!
During replacement, all the cavities of the carrier (1) and the
crashbox (2) must be sealed with cavity sealant.
Version with brake air duct:
Release screw (1) on cooling air guide (2) on left/right.
Remove cooling air guide (2).
Note:
The following work step ends here:
"Removing and installing brake air duct".
RA Removing and installing/replacing carrier for front bumper trim
BMW AG - TIS
18.01.2013 09:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
