1 Series 135is (N54) Coupe
Important!
Risk of damage!
Do not damage bumper trim when pulling off.
Slide special tool 00 9 317 between bumper trim (1) and
bracket (2).
Release catches in area (3) and lever out bumper trim (1) in
outward direction.
Pull bumper trim (1) forwards a little.
If necessary, disconnect plug connections on ultrasonic sensors
and/or front fog lamps.
If necessary, unlock and detach hose for headlight cleaning
system.
Remove bumper trim (1) towards front with aid of a 2nd person.
Installation:
Catches (2) of bumper trim (1) must not be damaged.
If necessary, carry out height adjustment, refer to Gap
dimensions, body.
Replacement:
•
Modify middle front radiator grille
•
Modify trim grille in bumper trim
•
Modify trim grille in bumper trim on left/right
•
Modify towing eye cover
Depending on version:
•
Modify number/license plate
•
Modify baseplate for number/license plate
•
Modify spray nozzles
•
Modify fog lamps
•
Modify ultrasonic converter
RA Removing and installing/replacing front bumper trim
BMW AG - TIS
18.01.2013 09:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -