1 Series 135is (N54) Coupe
51 12 156
Removing and installing/replacing rear
bumper trim (M Technic aerodynamic kit)
Necessary preliminary tasks:
•
Remove both rear lights.
Note:
Description is shown on the E82 by way of example. There may
be differences in detail in the case of other models.
Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.
Release screws (1) on wheel arch trim (2) on left/right.
Installation:
Make sure wheel arch trim (2) is in correct position.
Note:
Picture shows E92. Screw (1) not fitted on E82/E88.
Bend wheel arch cover (2) in area (A) to one side and release
screw (3) on left/right.
RA Removing and installing/replacing rear bumper trim (M Technic aerodynamic kit)
BMW AG - TIS
18.01.2013 09:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -