1 Series 135is (N54) Coupe
51 45 310
Removing and installing (replacing) centre
trim for instrument panel
Special tools required:
•
00 9 340
Important!
Risk of damage!
When working on trim panel components, make sure that the
sensitive surfaces are not scratched or damaged.
Version without CCC/ASK:
Unclip bottom trim cover (1) with special tool 00 9 340 .
Unclip top trim cover (1) with special tool 00 9 340 .
Pull out trim (1) and disconnect associated plug connection.
Replacement:
•
Remove operator unit for heater/air conditioner
•
If necessary, remove centre console switch cluster
RA Removing and installing (replacing) centre trim for instrument panel
BMW AG - TIS
18.01.2013 10:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
