1 Series 135is (N54) Coupe
Installation:
Following parts of roofliner must not be damaged or missing:
-
If necessary, mounting and frame (1) for front mounting
bracket
-
Wiring harness (2)
-
Mounting and frame (3) for rear mounting bracket
-
Velcro-type fasteners (4)
-
Clips (5).
Installation:
Installation sequence:
1.
Secure roof liner with mucket
2.
Secure roofliner in middle to Velcro-type fastener
3.
Snap roofliner into clips at rear
4.
If necessary, insert expander rivets at front
5.
Screw down grab handles at front on left/right
6.
Screw down sun visors and counter supports
7.
Add final details to vehicle
RA Removing and installing/replacing roofliner (with slide/tilt sunroof)
BMW AG - TIS
18.01.2013 10:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -