1 Series E87 116i (N45) 5-door
Note:
Illustration with engine removed.
Make sure gasket is correctly seated on cylinder head at rear.
Installation:
Tighten down all screws in diagonal sequence from inside
outwards.
Clip in cable duct (3).
Clip in cable (2).
Vent hose (1) must snap audibly into place.
Tighten nuts.
Assemble engine.
RA Removing and installing/sealing cylinder head cover (N40 / N45)
BMW AG - TIS
16.01.2013 19:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -