1 Series E87 116i (N45) 5-door
11 31 005
Checking camshaft timing (N40 / N45)
Special tools required:
•
11 5 120
•
11 7 251
•
11 7 252
•
11 7 253
•
11 9 190
Necessary preliminary tasks:
•
Remove cylinder head.
•
Remove all spark plugs.
Unscrew bolt (1).
Unclip oil line (2).
Crank engine at central bolt in direction of rotation to firing TDC
position of 1st cylinder.
Inlet camshaft:
Note:
The twin surface for locating the camshaft has a curvature on its
upper side and a straight edge on its lower side.
In the firing TDC position of the 1st cylinder, the curvature on the
twin surface points upwards in the cylinder-bore axis.
RA Checking camshaft timing (N40 / N45)
BMW AG - TIS
16.01.2013 19:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
