1 Series E87 116i (N45) 5-door
Bearing caps of inlet camshaft are marked E1 to E4 from inlet
side.
Lubricate inlet camshaft and bearing caps with engine oil.
Fit bearing caps of inlet camshaft.
Note:
Retaining clips (1) for oil line are fitted on bearing
caps 1 and 4.
Insert all nuts and install without play.
Tighten down nuts on bearing caps in 1/2 turn increments from
inside outwards.
Tightening torque, 11 31 1AZ
.
Fit bearing bracket (1).
RA Removing and installing/replacing inlet camshaft (N40 / N45)
BMW AG - TIS
16.01.2013 19:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -