1 Series E87 116i (N45) 5-door
Depending on version:
Release screws (1) on carrier (2).
Remove shock absorbers (3) on left/right.
Release washer fluid hose (4) from carrier (2).
If necessary, release blind rivets (2) on left/right.
Release nuts (1) on left/right and remove carrier (3).
Installation:
Blind rivets (2) are only required for fitting in the factory and do
not have to be refitted.
Tightening torque 51 11 2AZ
.
RA Removing and installing/replacing carrier for front bumper trim
BMW AG - TIS
16.01.2013 23:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
