1 Series E87 116i (N45) 5-door
63 12 871
Replacing ignition unit for right xenon
headlight (with xenon bulb) (up to 03/2007)
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights).
Important!
Ignition unit and xenon bulb are viewed as a single
component and must not be separated.
Unlock spring wire clips (1) in direction of arrow.
Remove cover (2) in upward direction from headlight (3).
Installation:
Make sure cover (2) is correctly seated on headlight (3).
Disconnect plug connection (1).
Unlock spring wire clip (2) and fold upwards.
Remove ignition unit for xenon headlight (3) upwards from
headlight (4).
Installation:
Make sure ignition unit (3) is exactly seated on headlight (4).
RA Replacing ignition unit for right xenon headlight (with xenon bulb) (up to 03/20
BMW AG - TIS
17.01.2013 02:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
