bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing A_C Compressor (N45 _ N46)|Page 2544 > < 2 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2542
Page 1
background image

64 52 523

Replacing A/C compressor (N45 / N46)

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Follow safety instructions for handling refrigerant oil.

Avoid contact with refrigerant and refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Read and comply with notes on replacing compressor. 

Follow instructions for opening and replacing parts in
refrigerant circuit!

If A/C system is opened for more than 24 hours:

Replacing drier insert for A/C system

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Remove A/C compressor drive belt

Remove suction filter housing.

Disconnect plug connection (1).

Release screws (2).

Remove lines (3, 4) towards top.

Installation:

Replace all sealing rings and moisten with refrigerant oil.

Tightening torque 64 52 1AZ

.

RA  Replacing A/C compressor (N45 / N46)

BMW AG - TIS

17.01.2013  03:13

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing A_C Compressor (N45 _ N46)|Page 2544 > < 2 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2542