1 Series E87 116i (N45T) 5-door
2 =
Green /
3 =
Red /
The numbers shown in the picture denote the bearing shell
classification (colour) for the respective bearing position from
1 to 5 in the upper crankcase.
Depending on the identification on the crankshaft, yellow-, green-,
or red-coded bearing shells are installed at the relevant bearing
position.
Crankshaft
identification
Upper crankcase
A=
Yellow /
B =
Green /
C=
Red /
Replacement crankshaft identification:
The letter featured in the illustration at the 1st position on the
replacement crankshafts denotes the conrod construction stage.
B = construction stage 1 (- 0.25 mm)
C = construction stage 2 (- 0.50 mm)
Replacement crankshaft identification:
The letter featured in the illustration directly before the numeric
code denote on a replacement crankshaft the construction stage
of the main bearing journal.
B = construction stage 1 (- 0.25 mm)
C = construction stage 2 (- 0.50 mm)
RA Replacing all main crankshaft bearing shells (N45T)
BMW AG - TIS
17.01.2013 15:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -