1 Series E87 116i (N45T) 5-door
11 22 500
Removing and installing or replacing flywheel
(N45T)
Special tools required:
•
11 4 180
•
11 9 260
Necessary preliminary tasks:
•
Clutch removed.
Block flywheel with special tool 11 9 260 .
Release screws with special tool 11 4 180 .
Remove special tool and flywheel.
Tightening torque 11 22 1AZ
.
Installation:
Check adapter sleeve (1) for damage.
Replace if necessary.
Note:
Note installation position.
RA Removing and installing or replacing flywheel (N45T)
BMW AG - TIS
17.01.2013 15:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -