1 Series E87 116i (N45T) 5-door
Fit special tool 11 7 251 on exhaust camshaft.
Turn back special tool 11 7 253 .
Hold inlet camshaft with special tool 11 7 251 so that it rests
without a gap on cylinder head.
Insert screws and tighten down special tool 11 7 251 on
cylinder head.
Tighten down special tool 11 7 253 by hand until it is supported
on special tool 11 7 252 .
Insert screw and tighten down special tool 11 7 252 on cylinder
head.
Assemble engine.
Remove special tools.
RA Removing and installing/replacing exhaust camshaft (N45T)
BMW AG - TIS
17.01.2013 15:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
