1 Series E87 116i (N45T) 5-door
Detach vent (1) in direction of arrow.
Slacken nut (3) of safety battery terminal (2).
Tightening torque 61 21 1AZ
.
Detach safety battery terminal (2) towards top, lay to one side
and secure.
Release threaded pin (5) and remove holder.
Fold back both bar fasteners (4) and pull battery (6) to right out
of associated fixture.
Lift out battery (6).
Installation:
Make sure battery (6) is correctly seated in associated fixture.
Replacing version with intelligent battery sensor (IBS):
•
Read out fault memory, clear if necessary
•
Register battery replacement
RA Removing and installing (replacing) battery (up to 03/2007)
BMW AG - TIS
17.01.2013 21:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -