1 Series E87 116i (N45T) 5-door
Release screw (1).
If necessary, lay refrigerant lines (2) and (3) slightly to one side.
Unlock retaining lug (1) in direction of arrow and pull A/C system
condenser (2) towards rear slightly.
Feed out A/C system condenser (1) upwards between vent
line (2) and cover (3).
After installation:
•
Evacuate and fill A/C system
•
Fill and vent cooling system and check for leaks
RA Removing and installing or replacing condenser for A/C system
BMW AG - TIS
17.01.2013 22:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -