1 Series E87 118d (M47T2) 5-door
11 12 500
Removing and installing cylinder head (M47 /
M47TU)
Special tools required:
•
00 1 450
•
11 3 350
•
11 8 040
(engine removed)
Remove engine support frame on right.
Secure engine with special tool (mounting plate) 11 8 040 to
special tool (assembly stand) 00 1 450 .
Note:
Special tool 11 3 350 (mounting plate) can also be used
after reworking.
The subsequent procedure is described in the sections Removing
and installing camshafts and
Removing and installing cylinder head.
RA Removing and installing cylinder head (M47 / M47TU)
BMW AG - TIS
18.01.2013 08:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
