1 Series E87 118d (M47T2) 5-door
11 14 141
Replacing radial seal in timing case cover at
bottom (M47TU / M47TU2)
Special tools required:
•
11 1 210
•
11 1 212
•
11 5 110
•
11 7 400
•
11 7 410
Necessary preliminary tasks:
•
Remove vibration damper.
Fit special tool 11 1 212 to crankshaft.
Removing radial sealing ring:
Screw in special tool 11 1 210 until it is firmly connected to
radial seal.
Then remove radial sealing ring by turning screw.
RA Replacing radial seal in timing case cover at bottom (M47TU / M47TU2)
BMW AG - TIS
18.01.2013 08:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
