1 Series E87 118d (M47T2) 5-door
Release sprocket wheel bolts (1).
Release bearing pins (2) of guide rails.
Release sprocket wheel with chain (1) from inlet camshaft in
direction of arrow.
Release guide rail (2) from mounting and pull out in direction of
arrow.
Remove sprocket wheel (2) in direction of arrow to right from
timing chain (3) and remove towards top.
Release screws (1) of camshaft bearing cap in 1/2 turn
increments evenly from outside to inside.
Note:
Illustrations show M47TU.
RA Replacing camshafts (M47T2)
BMW AG - TIS
18.01.2013 08:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
