1 Series E87 118d (M47T2) 5-door
Pull out oil filter element (1) and replace.
Installation:
Press oil filter element (1) onto support in oil filter housing.
Fit main flow oil filter cover and tighten down.
Tightening torque 11 42 2AZ
Unclip hoses.
Remove hose holder (2).
Detach rubber strip (1).
Release profile seals (3).
Release locks () and remove side trim panel.
Release hose clamps (1).
Detach water hoses from oil-water heat exchanger.
RA Removing and installing, sealing or replacing oil-to-water heat exchanger (M47TU
BMW AG - TIS
18.01.2013 08:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -