1 Series E87 118d (M47T2) 5-door
Release clamps (1) and detach oil return hose.
Remove sealing cap (1) from heat protection shield.
Pull out seal plug.
Installation:
Sealing cap (2) must be fitted on heat protection shield (1) and
clipped into place at front.
Installation:
Replaced damaged seal plugs.
Insert three seal plugs (1) from above.
RA Removing and installing or replacing exhaust turbocharger (M47T2)
BMW AG - TIS
18.01.2013 08:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
