1 Series E87 118d (M47T2) 5-door
The IMA codes must be read off in each case when new injectors
are installed.
EU3: The adjustment value (6-position letter/number code) is
engraved on each injector.
EU4: The adjustment value (7-position letter/number code) is
engraved on each injector.
Enter the numbers/letters according to the installation location
(cylinder) of the new injectors.
-
Select "Digital Diesel Electronics"
-
Select "Adjustment, injector quantity adjustment"
-
Select "Test schedule"
-
The adjustment must be entered for each cylinder on which
an injector has been replaced.
It is necessary to adjust the new injectors to ensure their full
functional capability.
Note:
Check stored fault messages.
Clear fault memory
RA Removing and installing/replacing all injectors in fuel injection system (M47TU,
BMW AG - TIS
18.01.2013 08:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
